More Personalization for Pets

A couple months ago, I first experimented with using stencils to create personalized items for my pets, i.e. a custom wooden toy box for my dog, Sandy (which you can read about here).

Recently, I purchased a wire and wood basket at Michaels Craft Store to better organize cans of food and containers of treats for my cat, Olive.

While I’m still not a pro at stenciling, I am definitely making progress. I also was able to reuse the set of stencils I purchased for my first project for Sandy.

The first time I used these stencils on Sandy’s toy box, I applied too much pressure while applying the paint and let the paint dry too long, resulting in some of the blue lines of the stencil transferring onto the surface I was painting. I then had to remove the blue bits with tweezers. This time I removed the stencil sooner after painting, but possibly a little too soon – as you can see, there is some smudging in the bottom corner of Olive’s name. I’m hoping to get the timing just right on my next try!

Here are some photos I took along the way and a glimpse at the final basket with Olive’s name!

Feel free to share in the comments what you think I should personalize next! I am always looking for ideas and additional opportunities to practice stenciling.

Positioning the stencils.

Taping the letter stencils down so they don’t move while I paint (even though the backs are sticky, the extra reinforcement helps make sure they don’t shift).

The supplies I used.

I applied the painting by carefully dabbing.

Almost there!

Ta-da!

This Week’s Pet Project: Personalized Dog Toy Box

Even though my home needs a lot more work (for example, I have plywood instead of a counter on one side of my kitchen), I am trying not to focus on just the big projects. Therefore, this weekend, I took a trip to Michaels Craft Store to load up on picture frames (on sale, of course) and supplies for “little touches” around the home. My first project: personalizing my dog’s toy box.

I found this great wooden box during Fall Clearance at Michaels Craft Store and instantly knew it would make a great toy box to keep in my living room for my lab, Sandy. She’s fallen in love with it too — constantly emptying out her toy box all over the room!

I decided to liven it up a bit by adding Sandy’s name and a design underneath. As it was my first time using decor stencils and chalk paint, I definitely learned a few good tricks and a few things not to do along the way.

Supplies

  • Letter stencils
  • Design stencil (I chose one with an arrow to include under Sandy’s name)
  • Chalk Paint
  • Paint Sponge
  • Wooden Box
  • Masking Tape
  • Tweezers
  • Scissors

The box, masking tape, tweezers, and scissors I had at home. All other supplies I purchased from Michaels Craft Store.

Step 1

First, choose a letter and accent design that you like. For this project, I used two different types of stencils. The first one required the letters be peel off and the second just required the design be placed over the the destination.

Step 2

As mentioned, my letters were of the “peel and stick” variety. Since I wanted to minimize the space between the letters, I trimmed the sides, as shown below.

Step 3

Arrange letters how you would like them to appear. I used masking tape as a guide of how to center the letters as well as to hold them down once I peeled the backs off, as the adhesive on the letters was weak. The advantage of this though is that I was able to lift and arrange the letters several times before committing to a spacing.

Step 4

Use the sponge to gently dab paint over each letter. Once done, let dry.

Step 5

Peel off the masking tape and stencils. Here is where I made a beginners mistake — I let the paint dry too long or pressed down too hard and some of the blue stencil stuck to the white paint when I lifted the stencils. But picking off the sticky blue lines with tweezers was a quick fix!

Step 6

I repeated the same steps for the second stencil — an arrow which I placed under Sandy’s name. Since this stencil did not have an adhesive, I used masking tape to keep it in place while I painted.

Step 7

After removing the tape and the stencil, I cleaned up the edges a bit with a fresh, damp sponge brush and voila!